:)

3. HANSTAR 852 SMD "Hot Air" Rework Partner





HANSTAR 852 Hot Air Rework Partner
* Two in one, (hot air nozzle & soldering iron 907 combined)
Features:
* Two in one, portable handle, easy to place and space saving
* Temperature heating rapidly
* Micro computer control, with good temperature stability
* Anti-static design, eliminating the harmful of static discharge
* The Rework Station has the same specs as the 850A
- Air volume and temperature are Adjustable, Suitable for Removing Various QFP, SOP, PLCC, SOJ, etc.
- ESD design safe for sensitive element.
- Automatic cooling system, Can work when power supply was Put off to prevent too hot.

CONTROL STATION:
Power consumption: 30W
Power consumption (After Power Off): 4W
Pump: Diaphragm model
Temperature range: 100-450℃
Air volume: 23 L/min
Resistance of welding nozzle to grounding: <2Ω
Voltage of welding nozzle to the grounding: <2mV
Length of Power line and soft pipe: 1.2m
Temperature Controller: Analog
voltage: 220V
Size:160(W)mm, 145(H)mm, 225(L)mm
Weight:about 4 kg

Sprayer:
Power consumption 270W
Length & Weight: 196mm , 120g

SOLDER IRON:
Soldering Iron Part name 907-ESD
Power consumption AC 24V 50w
Temperature range 200-480 ℃
Resistance between welding iron tip to ground < 2 Ω
Voltage of welding iron tip to the grounding < 2mV
The power line device 1.2m

NOTE: 1 SET includes 4 Free Nozzles:diameter 2mm, diameter 5mm, diameter 7mm, diameter 10mm

3. Heating Element 454H (JAPAN) -25W

note: picture of Heater 454H : to follow


3. Heating Element 454H (JAPAN) -25W
- Used in Soldering Iron Hakko N454 – 25W

2. SBF- A1322 HEATING ELEMENT (CHINA)


HAKKO A1321 (LEFT PICTURE) , SBF-A1322 (RIGHT PICTURE)


2. SBF- A1322 HEATING ELEMENT (CHINA)
- For 900M, 900L, 907, 908, 913 and 914 soldering iron
- Compatible to soldering tips 900M & 900L series tips
- LOW COST, GOOD QUALITY HEATER
- Used in soldering station Chinese Brands’ 936A, 937A

1. HAKKO A-1321


HAKKO A1321 (LEFT PICTURE) , SBF-A1322 (RIGHT PICTURE)


1. Heating Element HAKKO A-1321 (JAPAN)

(24V/50W) ceramic heater

- For 900M, 900L, 907, 908, 913 and 914 soldering iron
- Compatible to soldering tips 900M & 900L series tips
- Used in soldering station 936, 937
Part No. Application Iron
Hakko A1322 900S, 900S-ESD
Hakko-1321 907 / 908
ORIGINAL HAKKO (Origin: Japan)

1. Anti-Static Rubber Mat (ESD safe)







ANTISTATIC (ESD) RUBBER MAT
ESD Rubber Mat is also known as the Two Layer ESD Mat. ESD Rubber mat has Static Dissipative top rubber layer laminated to a conductive rubber bottom layer. Surface resistivity of top layer is 107 - 109 and bottom layer is 103 – 105. Meets ESD-D-412 standards .Material offers excellent resistance to oil, grease and most common solvent. ESD Rubber mat has resistant to 2400 F
The static dissipative top layer is designed to discharge static fields at the right speed to prevent damage. The conductive bottom layer of the ESD Rubber Mat is designed to quickly drain all the charges filtered by the top layer to the ground. The ESD Rubber Mat does not melt and does not burn coming into contact with hot metal parts or soldering debris. This ESD Table Mat is ideal for table top applications and comes with a ground cord so you can have your work space setup and ESD safe within seconds.
This Two Layer ESD Table Mat is also easy to clean.
Application: Work surface, Table Top
Color: Green (top), black (bottom)
Features:
1) High quality antistatic rubber mats ( Durable, heat and chemical resistance, non-slip surface, lays flat- will not curl)
2) Designed to drain charges from personnel, tote boxes, bags, components
3) Entirely free of carbon , Not affected by humidity
Application: table, floor, shelf , Use as either bench or floor mat
Economical, easy to cut , Easy to install , Easy to clean and maintain
Attractive shiny or dull finish
*Surface resistance: TOP LAYER :107-109 Ω
Bottom LAYER:103-105 Ω
Thickness: 2mm Available width: 1.01 m *Abrasion:< 0.02g/cm2 *Static elimination time:< 0.5S Note: 1 roll = 10m in length , Groundings sold separately

company profile























HANSTAR ELECTRONICS EQUIPMENT(SHENZHEN)


1. SMOKE ABSORBER- HANSTAR 493






SMOKE ABSORBER HANSTAR 493 -ESD
Features:
- ESD safe fan driven smoke absorber with replaceable activated carbon filter
- Can be used free standing or bench mounted with optional arm
- Supplied with 3 filters

•Removes toxic gas quickly and efficiently to safeguard health of workers.
•Angle may be adjusted at will and easy to place and move.
•Low noise and long service life fan; easy and quick to replace filter.
•Filters are made of special urethane foam plastic combined with finely processed activated carbon, highly absorbs fume and soldering flux.
•Anti-electrostatic types to meet sensitive operation environment.

Model No.: 493
Frequency: 50Hz / 60 Hz
Power Consumption: 16W
Absorption Capacity (w / Filter) : 0.93m3 / min.
Accessories Activated Carbon Filter: (3 pcs)
Outer Dimensions : 220(W) x 270 (W) x 168 (D) mm
Weight: Approx. 1.5kg

Activated-Carbon Filter (493-10)
Size: 130 x 130 x 10mm
Amount of Activated-Carbon per one filter: 7g
Max. Absorbing weight of noxious components per one filter: 2g

OPTIONAL: LONG ARM STAND FOR SMOKE ABSORBER

2. SMD REWORK "HOT AIR" STATION- HANSTAR 850D



SMD REWORK STATION- HANSTAR 850D

Features:
- Portable handles, easy to place and space saving.
- Air volume and temperature are Adjustable, Suitable for Removing Various QFP, SOP, PLCC, SOJ, etc.
- ESD design safe for sensitive element.
- Automatic cooling system, Can work when power supply was Put off to prevent too hot.

CONTROL STATION:
Model name: 850A
Power consumption: 30W
Power consumption (After Power Off): 4W
Pump: Diaphragm model
Temperature range: 100-450℃
Air volume: 23 L/min
Resistance of welding nozzle to grounding: <2Ω
Voltage of welding nozzle to the grounding: <2mV
Length of Power line and soft pipe: 1.2m
Temperature Controller: DIGITAL
voltage: 220V
Size : 160(W)mm, 145(H)mm, 225(L)mm
Weight: about 4 kg


SPRAYER
Power consumption 270W
Length, Weight: 196mm , 120g

Fit for 24hour Industrial Usage
1 SET includes Free 4 nozzles: diameter 2mm, diameter 5mm, diameter 7mm, diameter 10mm

1. SMD REWORK "HOT AIR" STATION HANSTAR 850A



SMD REWORK STATION- HANSTAR 850A

Features:
- Portable handles, easy to place and space saving.
- Air volume and temperature are Adjustable, Suitable for Removing Various QFP, SOP, PLCC, SOJ, etc.
- ESD design safe for sensitive element.
- Automatic cooling system, Can work when power supply was Put off to prevent too hot.

CONTROL STATION:
Model name: 850A
Power consumption: 30W
Power consumption (After Power Off): 4W
Pump: Diaphragm model
Temperature range: 100-450℃
Air volume: 23 L/min
Resistance of welding nozzle to grounding: <2Ω
Voltage of welding nozzle to the grounding: <2mV
Length of Power line and soft pipe: 1.2m
Temperature Controller: Analog
voltage: 220V
Size : 160(W)mm, 145(H)mm, 225(L)mm
Weight: about 4 kg


SPRAYER
Power consumption 270W
Length, Weight: 196mm , 120g

Fit for 24hour Industrial Usage
1 SET includes Free 4 nozzles: diameter 2mm, diameter 5mm, diameter 7mm, diameter 10mm

How and WHY to Solder Correctly

SMT 101

Professional SMT Soldering No. 2 - Surface Mount